Vitocal heat pumps

To product overview

Our smart Vitocal heat pumps use environmental energy

Not only can the Viessmann Vitocal product range offer heating, it can also be used for cooling and to supply a building with hot water. And unlike other heating systems, no fuel such as oil or gas has to be burned for this. Instead, the Vitocal uses free energy directly from the environment – be it from the ambient air, groundwater or the ground. This not only saves resources, but also reduces carbon dioxide emissions.

In principle, Viessmann Vitocal heat pumps can be divided into five groups.

Using energy from the environment for heating, cooling and DHW with Vitocal

Viessmann Vitocal heat pumps are suitable for both new build and modernisation. With a flow temperature of up to 70 °C, the Vitocal 150-A was specially developed for modernisation projects. Existing radiators can continue to be used. Underfloor heating is not essential. High energy efficiency, convenient control via app, sustainable operation and attractive design are all convincing features.

Answers to questions about the new Vitocal

App control, noise level, pumping - the following videos answer the most frequently asked questions about the latest Vitocal generation.

Using energy from the environment for heating, cooling and DHW with Vitocal

Viessmann Vitocal heat pumps are suitable for both new build and modernisation. With a flow temperature of up to 70 °C, the Vitocal 150-A was specially developed for modernisation projects. Existing radiators can continue to be used. Underfloor heating is not essential. High energy efficiency, convenient control via app, sustainable operation and attractive design are all convincing features.

Viessmann heat pumps can also be combined with existing heating systems that still run on oil or gas. The boilers already in place are tasked with covering peak loads. The rest of the time, the Vitocal heat pumps provide heating and hot water.

Vitocal heat pumps can also be combined with a photovoltaic system. The self-generated electricity is used to power the heat pump. This is because, in addition to environmental energy (about three quarters), around one quarter electricity must be supplied so that the heat pump can convert the ambient energy into usable heat. With the special Vitocal function, the refrigerant, which serves as the transfer medium, has to be both compressed and then expanded again. Compressors and expansion valves are used for this. They require electrical energy. You can find out how this works in detail here: How a heat pump works.

Using the Viessmann Vitocal for cooling

In addition to heating and hot water, Vitocal heat pumps can also provide cooling. A distinction must be made between natural cooling and active cooling. In the case of the former, brine or groundwater extract heat from the heating circuit via a heat exchanger. This heat is transferred outdoors. The natural ambient temperature is then used for cooling. It should be emphasised that only the circulation pump and control unit remain switched on during this process. All Viessmann brine/water heat pumps use this form of cooling. An accessory is required for the integral cooling function: the NC-Box. The NC-Box is equipped with a mixer for integration into the cooling circuit. This enables continuous operation without falling below the dew point.

Another option is active cooling. Here, the function of the heat pump is reversed. The Vitocal then functions like a refrigerator. In addition the 200-A and 222-A are equipped with circuit reversal.

What sets the Viessmann Vitocal product range apart?

All Viessmann Vitocal heat pumps are characterised by very quiet operation, with low vibrations and low maintenance. In addition, they have an impressively high coefficient of performance (COP). This describes the ratio of heat transfer to power consumption. The higher this value, the more efficiently the heat pump works.

Vitocal products operate quietly due to the sound-optimised, low vibration appliance design. 

In addition, many models can be installed close to the living space, as they do not take up a lot of room. This is what marks out the 222-G compact units in particular. The footprint of the former, for example, is less than half a square metre. 

Vitocal product range: flexible application options

Vitocal heat pumps offer flexible use with their different output stages and modulating operation. This means they are not just suitable for newly built detached houses, but also apartment buildings or even small commercial premises. The Vitocal 350-G high temperature heat pumps are ideal for larger existing buildings that are equipped with radiator heating systems. This is because they provide high flow temperatures of up to 70 degrees Celsius. Accordingly, they can also be used very effectively in the modernisation of detached houses and apartment buildings.

It is also possible to increase the heating output and cooling capacity by creating what is known as a cascade. This means that several Vitocal heat pumps from the same model series can be connected in series. For example, an output of up to 589 kW can be achieved with the Vitocal 300-G by using the integral cascade function.

For more sizeable residential or apartment buildings, it is possible to install large Viessmann heat pumps. For example, a Vitocal 300-G/-W Pro achieves up to 240 or 290 kW. If several of these models are in turn connected in a cascade, an output of up to 1450 kW is feasible. They are therefore also suitable for commercial enterprises and local authority premises.

The most important features of the Vitocal models at a glance

Heat pump Type

Integral
DHW cylinder

Application Cooling

Vitocal 100-A

Monobloc

No

Residential homes, modernisation projects, new build

AC

Vitocal 150-A

Monobloc

No

Residential homes, modernisation projects

AC

Vitocal 151-A

Monobloc

Yes

Residential homes, modernisation projects

AC

Vitocal 200-A

Monobloc outdoor installation

No

Residential homes,  modernisation projects, new build

AC

Vitocal 222-A

Monobloc outdoor installation

Yes

Residential homes,  modernisation projects, new build

AC

Vitocal 300-A

Monobloc outdoor installation

Yes

Commercial property

-

Vitocal 350-A

Monobloc indoor installation,
monobloc outdoor installation

No

Commercial property

-

Heat pump Heat

Integral
DHW cylinder

Application Cooling

Vitocal 333-G

Ground

Yes

Detached houses

NC+

Vitocal 222-G

Ground, ice store

Yes

Detached houses

NC+

Vitocal 300-G

Ground, water*, ice store

No

Detached houses, apartment buildings

NC+, AC+

Vitocal 200-G

Ground

No

Detached houses, apartment buildings

NC+

Vitocal 350-G

Ground, water*

No

Apartment buildings, commercial enterprises, high temperature

NC+

Vitocal 300-G

Ground, water*

No

Apartment buildings, commercial enterprises

NC+
+ Accessories required

Product range

How can we help?