Vitocell 200 unvented hot water storage cylinders are available in ten sizes, to suit all applications; seven single coil cylinders and three twin coil cylinders for connection to solar panels.
Vitocell 200 cylinders are built to a high specification for long term durability, mechanical strength and reliability. Manufactured from Duplex stainless steel, they are designed to resist all forms of corrosion including crevice and stress.
High performance and minimal heat loss are achieved by a minimum of 50 mm polyurethane foam insulation, which is injected into the case and covers both domes.
The cylinders are particularly light and easy to handle and are supplied with all the necessary cold and hot water controls and a 2-port valve for control of domestic hot water. An auxiliary back up 3kW immersion heater is also supplied, with operating thermostat and energy cut out. The immersion heater is fitted at the front for easy access. It is designed for use on unvented installations and contains a safety overheat thermostat in addition to the operating thermostat. All plumbing connections are provided with 22mm compression fittings with nuts and olives for ease of installation and optimum flow rate.
Key features
• Attractive white painted un-vented domestic hot water cylinder range
• Volumes of 90/120/150/180/210/250/300 litres for single coil
• Solar twin coil in 210/250/300 litres
• High Grade Duplex Stainless Steel cylinder
• Light weight design for ease of transport and handling
• Insulation exceeds Chess Best Practice as low as 1.4kW/24hr
• High recovery heating coil is less than 19 minutes
• All cylinders can be connected to Viessmann 4-pipe systems with separate
sensor pockets
• Stand alone cylinder (complies with G3)
• High flow rates achievable working at 2.5 Bar pressure
• External expansion vessel (supplied)
• Dimensions of 600mm at widest point (all models)
• Simple front connection compression fittings
• Back up 3kW immersion heater on all models
• Simple maintenance no anode required
• Warranty 25 years for perforation of shell and 2 years for all other parts
top
back