Vitobloc 200 type BM-55/88 - biogas CHP units in the medium output range


Take advantage of these benefits

  • Operation with biogas; no upgrading to biomethane required
  • Fully plumbed and wired; factory tested
  • With mains substitution mode as standard
  • Proven remote monitoring and automation systems
  • Attractive subsidy programmes


CHP units with low emissions for local heating networks

Vitobloc 200 BM-55/88 CHP units deliver 55 kWel and 88 kWth. They are suitable for operation with biogas. They are designed for use in local heating networks, particularly in combination with a biogas plant.

In such networks, the heat generated can be distributed to consumers, while the power generated on site can be used in the biogas plant or exported to the public grid.


Supplied ready to connect

Vitobloc 200 meets the demanding technical connection conditions (TAB) of the network operators.

The standard equipment includes starter batteries and a synchronous generator, which also allow the CHP unit to run in mains substitution mode.

Fully plumbed and wired units tested in the factory mean minimum installation effort and tested output values.

Product cross-section

Produktschnitt Vitobloc 200 Typ BM-55/88

Function diagram

Funktionsschema Vitobloc 200 Typ BM-55/88