Vitosol 200-FM – high performance flat-plate collector with switching ThermProtect absorber layer

Available with an aluminium coloured frame, the powerful Vitosol 200-FM flat-plate collector is the perfect addition to any heating system. With an individual absorber area of 2.3 m², solar collectors can be effectively matched to any energy demand.

On average, they can replace up to 60 percent of the energy that would otherwise be required each year for DHW heating, and contribute to central heating backup. When used in conjunction with a condensing boiler, free solar energy can help you reduce your annual energy consumption for heating and DHW by over one third.
 

Take advantage of these benefits

  • No overheating and steam formation at high outside temperatures or low heat dissipation
  • Higher solar coverage for central heating backup and DHW heating
  • Universally suitable for above roof installation, roof integration, flat roof installation, or wall mounting
  • High performance flat-plate collector with switching ThermProtect absorber layer
  • Can be installed horizontally or vertically

 

 

Vitosol 200-FM solar collector

Vitosol 200-FM solar collector

The powerful Vitosol 200-FM flat-plate collectors are the ideal supplement for any heating system. With its absorber surface of 2.3 m², the solar collector adapts to the respective energy requirements.

On an annual average, they replace up to 60 percent of the energy otherwise required for DHW heating and contribute to backup heating. In combination with a condensing boiler, free solar energy can even save more than a third of the annual energy for heating and hot water.

ThermProtect prevents overheating

An intelligent absorber layer protects the collectors from overheating. The ThermProtect technology patented by Viessmann switches off further energy consumption when the solar cylinder is fully heated when a certain temperature is reached.

ThermProtect also produces a higher yield with the Vitosol 200-FM compared with conventional flat-plate collectors, as a more generous dimensioning is possible.

ThermProtect

ThermProtect

Above the switching temperature, the crystal structure of the absorber layer changes, increases the heat radiation many times over and reduces the collector output. This significantly lowers the stagnation temperature and prevents the formation of steam in the solar circuit.

As the collector temperature drops, the crystal structure returns to its original state. Then, more than 95 percent of the incident solar energy is absorbed and converted into heat. Only the remaining five percent is reflected. The change of the crystal structure is infinitely reversible and the function is permanently available.

Attractive on all roofs

The Vitosol 200-FM is the right choice if the solar collector is to be supplied with a frame in an individual RAL colour. It is painted dark blue as standard and adapts to almost any roof surface. For harmonious roof integration, the Vitosol 200-FM, type SV2G (vertical) or type SH2G (horizontal), can be installed almost flush with the roof cladding.

Permanently tight and well insulated

The all-round curved aluminium frame and the seamless pane enclosure guarantee permanent tightness and high stability of the solar collector. The rear wall is puncture-proof and corrosion-resistant. Highly effective thermal insulation reduces heat losses, especially in transitional periods and in winter.

Simple installation

The collectors are particularly easy to install. Integrated flow and return pipes allow safe mounting of even larger collector arrays using flexible stainless steel corrugated pipe connectors. Up to twelve solar collectors can be easily connected to each other.

The flat collectors are universally suitable for on-roof mounting, roof integration and elevated mounting, for example on flat roofs. The easy-to-install Viessmann fastening system consists of statically tested and corrosion-resistant components made of stainless steel and aluminium.

Vitosol 200-FM solar collector – roof integration

Roof integration

The Vitosol 200-FM, type SV2G (vertical) or type SH2G (horizontal) versions can be selected for seamless roof integration, lying almost flush with the roof cladding when installed.

Collector frame of the Vitosol 200-FM solar collector

Collector frame with special roof integration profile for fitting the flashing frame


Product cross-section

Overview

Gross area
2.51 m² (SV2F/SH2F), 2.56 m² (SV2G/SH2G)
Absorber area
2.32 m²
Collector type
icon-solar.png
Flat plate collector
Design
Frame in dark blue. On request, the frame is also available in all other RAL colors.
Applications
icon-wohngebaeude.png icon-gewerbe.png icon-kommunen.png
Residential, commercial, public | New construction and modernisation.
Installation
Flat plate collector for vertical (type SV2F) or horizontal (type SH2F) assembly, for flat and pitched roofs, type SV2G (perpendicular) and SH2G (horizontally) for roof integration.
Other features
For DHW, heating and swimming pool water via a heat exchanger.
Vitosol-200-FM-Schnitt.png