Vitomax 200-HS M73A - compact and efficient
Take advantage of these benefits
- Energy-saving thermal insulation
- Large steam chamber with low load
- High efficiency of up to 95 percent
- Water-cooled burner entry point at the front and rear reversing chamber surrounded by water
- Low-stress design
High pressure steam for industrial use
The Vitomax 200-HS high pressure steam boiler is the right solution for large industrial concerns, such as those involved in the food processing, fertiliser, construction material, paper, beverage, chemical and pharmaceuticals, as well as hospitals and refineries.
The boiler provides a continuous supply of steam at an output of 0.5 to 4 t/h. Its operating pressure extends from 6 to 25 bar.
The lateral arrangement of the flame tube resulted in a highly compact boiler design that meets all the requirements for efficient steam generation.
Large steam chamber with low pipe load
The spacing between the smoke tubes, as well as from the smoke tubes to the boiler shell and to the flame tube, are well above requirements.
The shearing force on the end face floors caused by different linear expansion in the smoke tubes and the flame tube is therefore extremely low.
The corner stays of the boiler are always arranged in pairs. As a result, forces are distributed throughout the boiler, reducing stress and increasing the service life.
High pressure steam boiler, steam output: 1 - 6.4 t/h, permissible operating pressure 6 to 16 bar, for commerce, industry, new build and modernisation projects
High pressure steam boiler, steam output: 5 - 26 t/h, permissible operating pressure 6 to 25 bar, three-pass boiler, for commerce, industry, new build and modernisation projects
High pressure steam boiler, steam output: 1 - 4 t/h, permissible operating pressure 6 to 25 bar, three-pass boiler, for commerce, industry, new build and modernisation projects