Vitomax 200-HW M236 - for flow temperatures above 120 °C


Take advantage of these benefits

  • Clean combustion with low nitrogen oxide emissions
  • Reliable heat transfer; straightforward hydraulic connection
  • Low radiation losses thanks to optimum thermal insulation
  • Vitocontrol control panel for all boiler-related control equipment
  • Approved according to Pressure Equipment Directive 97/23/EC


Viessmann offers everything from a single source

The Vitomax 200-HW is an oil/gas high pressure hot water boiler for flow temperatures in excess of 120 °C. Its operating pressure extends from 6 to 25 bar. The heating output ranges from 0.52 to 2.84 MW.

No minimum heating water flow rate is required for the Vitomax. Wide water galleries and large water content ensure excellent natural circulation, which makes hydraulic connection easier.

Low pressure drop on the hot gas side thanks to optimum heating surface and smoke tube design.


Time is money

This is particularly applicable to industrial and commercial enterprises, where new heating centres often have to be operational as quickly as possible, so that heat for production can be supplied on time.

Pre-assembled equipment for the 120 °C protection reduces the amount of engineering work and saves money.

Thanks to water-cooled burner entry points, the refractory linings require no drying processes, which significantly reduces commissioning times.

Additionally required components for systems can be adapted by Viessmann, if necessary, to the system user's specification.

Product suggestions