Vitocell 200-V

A state of the art DHW storage cylinder 

The Vitocell 200 range of unvented hot water storage cylinders are indirectly heated cylinders designed for use with Vitodens system boilers (or UK standard boilers). Cutting-edge, innovative technology results in astonishingly low levels of heat loss and exceptional performance.

  • Designed for
  • Domestic
    Hot Water
  • Up to
    300 litres
  • CFC/HCFC free
  • Standalone
  • Easy to
  • Anti-corrosion
  • Made in
  • CFC/HCFC free fire retardant polyurethane foam 
  • Insulation exceeds CHESS Best Practice
  • High recovery heating coil in less than 19 minutes
  • All cylinders have a separate sensor pocket for connection to a Viessmann 4-pipe system
  • High flow rates achievable working at 3.0 Bar
  • Stand alone cylinder, complies with G3 Building Regulations
  • Back up 3 kW immersion heater
  • Up to 300 litre capacity
  • External expansion vessel (supplied)
  • Dimensions of 600 mm at widest point
  • Simple front connection compression fittings
  • Simple maintenance – no anode required
  • Lightweight design for ease of transport and handling and convenient installation
  • 25 year warranty against corrosion

Key Benefits

Basic Appliance

  1. Hot water draw off (22 mm) compression
  2. Temperature & pressure relief valve 92-95°/6 bar
  3. Hot water secondary return 22 mm (not fitted to smaller sizes)
  4. Immersion heater 1¾” BSP 3kW
  5. 22 mm cold supply compression
  6. Not on current model
  7. Dual control/overheat stat pocket (22 mm)
  8. Boiler control sensor pocket (spare)
  9. Primary return (22 mm)
  10. Primary flow (22 mm) (not visible)

Built in control

With a Vitodens system boiler the cylinder is controlled by the built-in diverter valve and the optional tank sensor and comes supplied with all cold and hot water controls and a two-port valve for domestic hot water. The single coil cylinders are available in seven sizes, from 90 litres to 300 litres.

State of the art manufacturing

Manufactured from the very latest high specification Duplex stainless steel to resist all forms of corrosion, the cylinders are nevertheless light and easy to handle and insulated with at least 50 mm of polyurethane foam. This results in astonishingly low levels of heat loss and a performance greater than CHESS requirements.

Highly adaptable

All cylinders are also provided with an auxiliary back up 3 kW electric immersion heater. The operating thermostat and energy cut-out are for use with non-Viessmann boilers or traditional 'S' or 'Y' plan systems*. The immersion heater is fitted at the front for easy access and designed for use in un-vented installations, and it contains an additional safety overheat thermostat.

* Optional kit, not supplied as standard

Want more information about this product?

Not sure which product you need? Use our simple tool.

Product Data

Like what you see? Get a quote from a local installer.

Related Products

Vitocell 300-B
The ideal hot water cylinder for solar thermal systems

Hygienic, convenient and economical DHW heating in conjunction with solar collectors and a boiler. The heat from the solar collectors is transferred to the DHW via the lower internal indirect coil.

Discover the Vitocell 300-B
  • Designed for
  • Domestic
    Hot Water
  • Energy Efficiency
  • Storage capacity
    500 litres
Discover the Vitocell 300-B
  • EfficiencyLabel
Trending topics
Latest Topics