Available with an output range of 2.3 to 11.8 kW and featuring a monobloc design, the Vitocal 222-A provides effective and efficient heating and cooling.
The outdoor unit for the Vitocal 222-A follows the Advanced Acoustic Design (AAD), taking into account structural acoustic specifications. The result is hardly audible.
The high-quality and sound -optimised fan in combination with an intelligent speed control contributes significantly to the reduction of airborne noise at full and partial load operation. Low frequencies are largely avoided, which would otherwise be perceived as disturbing with conventional heat pumps.
With a sound pressure level of only 35 dB(A) at a distance of three metres (night mode), the outdoor unit (with a fan) of the new Vitocal 222-A air/water heat pump compact unit is one of the quietest units of this type. Installation close to the neighbouring property or in densely built-up areas, such as terraced housing estates, is therefore no problem.
The EHPA seal of approval serves as proof of the COP (Coefficient of Performance) for funding under the market incentive programme.
The German EHPA Quality Seal Commission certifies that the Viessmann Vitocal 222-A heat pump meets the requirements of the EHPA quality seal regulations.
The heat pumps can even be controlled from anywhere using the Vitotronic 200 control unit via the Vitoconnect web interface (accessory) and the free ViCare app.
The Vitoconnect 100 interface is required for operation via app. Retrofitting for earlier heat pumps in the Vitocal series (built in 2010 or later) is possible at any time.
The ViCare app enables system users to control their heating system via smartphone. The operating status can be viewed at any time and the contractor whose details have been stored in the app can be contacted quickly and easily if a fault occurs.
The whole is greater than the sum of its parts". In accordance with this philosophy, Viessmann does not simply supply individual heating equipment components that meet the high Viessmann standards for quality, reliability and effectiveness. In addition, all products are part of a matching overall concept, where all components complement one another. After all, only perfect interaction between all system parts can draw out the maximum potential of our innovative leading technology.
Viessmann system technology incorporates everything you need for a reliable and economical heating system, from the Vitotronic control unit with wireless remote control, powerful Vitocell DHW cylinders for the highest DHW convenience, right up to high grade solar thermal systems for cost effective central heating backup.
The Vitocal 222-A monobloc heat pump uses the heat contained in the outside air in an environmentally friendly and cost-effective manner. It can heat and cool. The compact unit has an integrated 220 litre DHW cylinder.
The new outdoor units in a timeless design are very pleasing to the eye. The units with one or two fans are developed and manufactured in-house. In addition to excellent performance levels, they have exceptional workmanship and product quality.
The compact, wall-mounted indoor unit with hydraulics and control is quiet and can be installed close to the living area. The connecting pipes to the outdoor unit are filled with water, for the installation of which the tradesman does not require F-gas certification. Due to the high degree of pre-installed components and matching accessories, the Vitocal 222-A can be installed in a very short time.
The Vitocal 222-A is equipped with a large integrated 220-litre DHW cylinder and the newly developed inflow device ensures very good layering, allowing a high tap volume of up to 290 litres (at 40°C).
The Vitoconnect 100 is a WiFi interface to establishes the connection allowing you to remotely operate your heating system by app, as well as supporting remote maintenance via Vitoguide.
With the new ViCare app, operating your heating system has become even easier and more intuitive. You can adjust heating times to suit your individual requirements using the integral wizard and see cost savings displayed instantly.
Rated heat output (kW)
2.3 to 11.8 kW
COP during heating operation
up to 5.0 (A7/W35) and up to 4.1 (A2/W35)
Energy efficiency class
A++ / A | Type 221.A04: A+ / A
Energy efficiency class: DHW
Single-family house, new construction and modernisation
Easy to operate Vitotronic control unit with plain text and graphic display, web-enabled via Vitoconnect (accessory) and free ViCare App
High DHW convenience thanks to 220-l hot water storage tank
Heating and cooling in one unit by reversible switching. Comfortable cooling function due to three cooling circuits.