Available with a coloured aluminium frame, the powerful Vitosol 200-FM flat-plate collector is the perfect addition to any heating system. With an individual absorber area of 2.3 m², solar collectors can be effectively matched to any energy demand.
On average, they can replace up to 60% of the energy that would otherwise be required each year for DHW heating, and contribute to central heating backup. When used in conjunction with a condensing boiler, free solar energy can help you reduce your annual energy consumption for heating and DHW by over one third.
The Vitosol 200-FM, type SV2G (vertical) or type SH2G (horizontal) versions can be selected for seamless roof integration, lying almost flush with the roof cladding when installed.
The Vitosol 200-FM is the right choice if the solar collector is to be supplied with a frame in an individual RAL colour. It is painted dark blue as standard and adapts to almost any roof surface. For harmonious roof integration, the Vitosol 200-FM, type SV2G (vertical) or type SH2G (horizontal), can be installed almost flush with the roof cladding.
Above the switching temperature, the crystal structure of the absorber layer changes, increasing the heat radiation many times over and reducing the collector output. This significantly lowers the stagnation temperature and prevents the formation of steam in the solar circuit.
As the collector temperature drops, the crystal structure returns to its original state, allowing more than 95 percent of the incident solar energy to be absorbed and converted into heat. Only the remaining five percent is reflected. The change of the crystal structure is infinitely reversible and the function is permanently available.
The all-round curved aluminium frame and the seamless pane enclosure guarantee permanent tightness and high stability of the solar collector. The rear wall is puncture-proof and corrosion-resistant. Highly effective thermal insulation reduces heat losses, especially in transitional periods and in winter.
The collectors are particularly easy to install. Integrated flow and return pipes allow safe mounting of even larger collector arrays using flexible stainless steel corrugated pipe connectors. Up to twelve solar collectors can be easily connected to each other.
The flat collectors are universally suitable for on-roof mounting, roof integration and elevated mounting, for example on flat roofs. The easy-to-install Viessmann fastening system consists of statically tested and corrosion-resistant components made of stainless steel and aluminium.
2.51 m² (SV2F/SH2F), 2.56 m² (SV2G/SH2G)
Flat plate collector
Frame in dark blue. On request, the frame is also available in all other RAL colors.
Residential, commercial, public | New construction and modernisation.
Flat plate collector for vertical (type SV2F) or horizontal (type SH2F) assembly, for flat and pitched roofs, type SV2G (perpendicular) and SH2G (horizontally) for roof integration.
For DHW, heating and swimming pool water via a heat exchanger.
Featuring an individual absorber area of 2.3m², these powerful flat plate collectors can be matched to any energy demand. They can be installed vertically or horizontally and benefit from a ThermProtect absorber layer.Discover the Vitosol 100-FM